Продажа оборудования для промышленной автоматизации

E-mail: sale@inortek.ru
Тел: (812) 646-73-76

Курс валют ЦБ РФ
1 USD = 56.3878 руб.
1 EUR = 69.0243 руб.
на 17-01-2018
Внимание: все расчеты производятся только в безналичной форме.


Производитель: SICK
Код заказа: 1059036
Наличие: Под заказ
Срок поставки: 3-5 нед.
Цена: По запросу Оптовикам ↓
Технические характеристики
Absolute encoders
Model NameAFM60A-BCNB018X12
Part No.1059036

At a glance

High-resolution 30-bit absolute encoder (18-bit singleturn and 12-bit multiturn)
Face mount flange, servo flange and blind hollow shaft
Connection type: 3 x M12 axial plug
PROFINET-IO-RT interface
Less than 5 ms data update time
Round axis functionality
Alarms, warnings and diagnostics functions for speed, position, temperature, operating time, etc.
Status display via 5 LEDs

Your benefits

Increased productivity as a result of intelligent diagnostics functions and rapid data transfer
Increase in network reliability due to early error detection
Simple installation with various configuration options
Flexible, easy setup and high resolutions for various applications with binary, integer and "decimal point" values based on round axis functionality
Maximum system availability through embedded switch technology
Compact and cost-efficient design

Max. number of steps per revolution:262,144
Max. number of revolutions:4,096
Resolution power:262,144 x 4,096
Resolution:18 bit x 12 bit
Error limits:≤ 0.03 °
Repeat accuracy:≤ 0.002 °
Measuring step deviation:± 0.002 °
Initialization time:Ca. 12 s
Mechanical data
Mechanical interface:Blind hollow shaft
Shaft diameter:0.375 ''
Mass:0.2 kg
Start up torque:0.8 Ncm (+20 °C)
Operating torque:0.6 Ncm (+20 °C)
Maximum operating speed:6,000 /min 1)
Moment of inertia of the rotor:40 gcm?
Bearing lifetime:3.0 x 10^9 revolutions
Max. angular acceleration:500,000 rad/s?
Permissible movement axial static/dynamic:≤ 0.5 mm, ≤ 0.1 mm
Permissible movement radial static/dynamic:≤ 0.3 mm, ≤ 0.05 mm
Shaft material:Stainless steel
Flange material:Aluminum
Type of mounting shaft:Blind hollow shaft
1) Self warming of 3.3 K per 1000 revolutions/min when applying note working temperature range  
Electrical data
Operating voltage range:10 V DC ... 30 V DC
MTTFd: mean time to dangerous failure:80 a (EN ISO 13849-1) 1)
Electrical connection:3 x connector M12, 4-pin, axial
Reverse polarity protection:0
1) This product is a standard product and does not constitute a
safety component as defined in the Machinery Directive.
Calculation based on nominal load of components, average ambient
temperature 40°C, frequency of use 8760 h/a. All
electronic failures are considered hazardous. For more information, see document no. 8015532.  
Electrical interface:PROFINET
Bus interface:PROFINET IO/ RT Class B
Data transmission rate (baud rate):10 Mbit/s / 100 Mbit/s
Encoder profile:V4.1 class3
RPI (requested packet interval):2 ms ... 750 ms
DLR (Device Level Ring):0
Endless operating functionality:1
Ambient data
EMC:(according to EN 61000-6-2 and EN 61000-6-3) 1)
Enclosure rating:IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529) 2)
Permissible relative humidity:90 % (condensation of the optical scanning not permitted)
Working temperature range:-30 °C ... +85 °C
Storage temperature range:-40 °C ... +100 °C, without package
Resistance to shocks:100 g, 6 ms (according to EN 60068-2-27)
Resistance to vibration:30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
1) The EMC according to the standards quoted is achieved if screened cables are used.  2) With mating connector fitted  

Возникли проблемы с выбором или появились вопросы - звоните (812) 646-7376 или (981) 777-7376
СенсорTEKOAutonicsBALLUFFifm electronic
Lenze-AC TechSew-EurodriveSolcon  
Copyright © ООО "Электронмаш СПб" | 197349, Россия, Санкт-Петербург, ул. Байконурская, 24 | (812) 646-7376 | sale@inortek.ru