Продажа оборудования для промышленной автоматизации

E-mail: sale@inortek.ru
Тел: (812) 646-73-76

Курс валют ЦБ РФ
1 USD = 56.5892 руб.
1 EUR = 69.3953 руб.
на 22-01-2018
Внимание: все расчеты производятся только в безналичной форме.


Производитель: SICK
Код заказа: 1016649
Наличие: Под заказ
Срок поставки: 3-5 нед.
Цена: По запросу Оптовикам ↓
Технические характеристики
Contrast sensors
KT10, KT10
Model NameKT10W-N2115
Part No.1016649

At a glance

Very low jitter (< 10 µs)
Precise light spot
Best contrast resolution thanks to RGB LED technology
Two interchangeable light exits
Five storage banks for settings
Automatic drift correction
Fast switching frequency of 25 kHz
Easy-to-read bar graph display

Your benefits

Very precise detection of print marks enables optimal results for packaging and printing applications
All contrast marks, even pale yellow on white paper, can be reliably detected thanks to RGB LED technology
Automatic drift correction helps detect difficult to see marks, such as faded print marks, enabling higher production reliability
Reliable operation, even with high-gloss reflective surfaces, increasing throughput
Simple teach-in via an external signal can be performed while the material is moving, enabling shorter setup time
Long-lasting, tough metal housing

The product has been discontinued. Please follow the "replacement product" link for information about alternative products.


Dimensions (L x W x H):80 mm x 30.4 mm x 53 mm
Sensing distance 1):12.5 mm
Sensing distance tolerance:± 2 mm
Light source 2) 3):LED red, green, blue
Light emission:Short side of housing
Light spot size:0.8 mm x 4 mm
Light spot direction 4):Horizontal
Adjustment:Dynamic teach-in (min/max)
Function:Deactivation delay ... 20 ms
1) From front edge of lens  2) Average service life of 100,000 h at TA = +25 °C   3) Wave length: 470 nm, 525 nm, 640 nm  4) In relation to long side of housing  
Supply voltage Vs 1):DC 12 V ... 30 V
Ripple 2):≤ 5 Vpp
Power consumption 3):< 150 mA
Switching frequency 4):25 kHz
Response time 5):20 µs
Jitter:< 10 µs
Output type:NPN: HIGH = approx. VS / LOW ≤ 2 V
Switching mode:NPN
Input, teach-in (ET) 6):NPN:, Run: U = 10 V ... < UV, Teach: U < 2 V
Input, blanking input (AT) 7):Blanked: U > 10 V ... < Uv, Free-running: U < 2 V, PNP:
Retention time (ET):25 ms, non-volatile memory
Connection type:Connector M12, 5-pin
Protection class 8):II
Circuit protection:Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
Enclosure rating:IP 67
Weight:Ca. 400 g
Housing material:Die-cast zinc
Output current Imax.:100 mA
1) Limit values  2) May not exceed or fall short of VS tolerances  3) Without load  4) With light/dark ratio 1:1  5) Signal transit time with resistive load  6) ET > 2 ms  7) AT > 200 µs  8) Reference voltage DC 50 V  
Ambient data
Ambient temperature:Operation: -10 ... 60 °C, Storage: -10 ... 75 °C
Shock load:According to IEC 60068
UL File No.:NRKH.E181493 & NRKH7.E181493

Возникли проблемы с выбором или появились вопросы - звоните (812) 646-7376 или (981) 777-7376
СенсорTEKOAutonicsBALLUFFifm electronic
Lenze-AC TechSew-EurodriveSolcon  
Copyright © ООО "Электронмаш СПб" | 197349, Россия, Санкт-Петербург, ул. Байконурская, 24 | (812) 646-7376 | sale@inortek.ru