Продажа оборудования для промышленной автоматизации

E-mail: sale@inortek.ru
Тел: (812) 646-73-76

Курс валют ЦБ РФ
1 USD = 56.4115 руб.
1 EUR = 69.0702 руб.
на 24-01-2018
Внимание: все расчеты производятся только в безналичной форме.


Производитель: SICK
Код заказа:
Наличие: Под заказ
Срок поставки: 3-5 нед.
Цена: По запросу Оптовикам ↓
Технические характеристики
Dust Measuring Devices
Scattered light dust measuring device

The DUSTHUNTER SB100 is an approved measuring device for dust at very low to medium concentrations in challenging applications, e.g. in hot or corrosive gases. The measurement is based on the backward scattering of light. Installation is made from one side only. Two different penetration depths are possible. Automatic compensation of background radiation, therefore no light absorber necessary. An automatic check of zero and reference point as well as contamination monitoring is integrated in the device.

At a glance

For very low to medium dust concentrations
One-side installation
Contamination check
Automatic check of zero and reference point
Automatic compensation of background radiation, therefore no light absorber necessary
For medium to large duct diameters

Your benefits

Easy installation, commissioning, and operation
Measurement independent of gas velocity, humidity and particle charge
Approved according to EN 15267
Low maintenance due to self-monitoring

Fields of application

Emission monitoring of power stations and waste incineration plants
Monitoring of filter plants
Monitoring of dust loads in factory workshops
Control of fresh air supplies and exhaust air plants


The exact device specifications and performance data of the product may deviate from the information provided here, and depend on the application in which the product is being used and the relevant customer specifications.

Technical data
Measurement principles:Scattered light backward
Measured values:Dust concentration (after gravimetric comparison measurement)
Scattered light intensity
Performance tested measurands:Scattered light intensity
Max. number of measurands:1
Measuring ranges:Dust concentration: 0 ... 10 mg/m3 / 0 ... 200 mg/m³
Comment:Higher measuring ranges on request
Process temperature:-40 ... +600 °C
Process pressure:With external purge air unit: -50 ... 30 hPa
With control unit MCU-P: -50 ... 2 hPa
other pressure ranges on request
Process gas humidity:
Duct diameter:≥0.5 m
Ambient temperature:Sender/receiver unit, control unit MCU-N: -40 ... +60 °C
MCU-P control unit: -40 ... +45 °C
intake temperatures for purge air
27. BImSchV
EN 14181
EN 15267
German Clean Air Regulations
Approved for plants requiring approval
Electrical safety:CE
Enclosure rating:IP 66
Analog outputs:3 outputs:
0/2/4 ... 20 mA, 750 Ω
electrically isolated; two additional outputs if using I/O modules (option)
Analog inputs:2 inputs:
0 ... 20 mA
not electrically isolated; two additional inputs if using I/O modules (option)
Digital outputs:5 relay contacts:
48 V, 1 A
floating; for status signals
Digital inputs:4 floating contacts
Interfaces:RS-232 (service interface)
RS-485 (via optional interface module)
Interface module (option)
USB (service interface)
Bus protocol:Ethernet (via optional interface module)
MODBUS (via optional interface module)
PROFIBUS DP (via optional interface module)
Operation:Via LC-display (option) or software SOPAS ET
System components:Sender/receiver unit
MCU control unit
Test functions:Automatic control cycle for zero and span point
Manual linearity check with reference filter
Contamination limits: at 20% warning, at 30% failure
Options:External purge air unit, I/O module(s), Interface module(s)

Возникли проблемы с выбором или появились вопросы - звоните (812) 646-7376 или (981) 777-7376
СенсорTEKOAutonicsBALLUFFifm electronic
Lenze-AC TechSew-EurodriveSolcon  
Copyright © ООО "Электронмаш СПб" | 197349, Россия, Санкт-Петербург, ул. Байконурская, 24 | (812) 646-7376 | sale@inortek.ru