Продажа оборудования для промышленной автоматизации

E-mail: sale@inortek.ru
Тел: (812) 646-73-76

Курс валют ЦБ РФ
1 USD = 56.4115 руб.
1 EUR = 69.0702 руб.
на 24-01-2018
Внимание: все расчеты производятся только в безналичной форме.


Производитель: SICK
Код заказа:
Наличие: Под заказ
Срок поставки: 3-5 нед.
Цена: По запросу Оптовикам ↓
Технические характеристики
Dust Measuring Devices
Scattered light dust measuring device

The DUSTHUNTER SF100 is an approved measuring device for dust at very low to medium concentrations. The measurement is based on the forward scattering of light. An automatic check of zero and reference point as well as contamination check is integrated in the device.

At a glance

For very low to medium dust concentrations
Contamination check
Automatic check of zero and reference point
For small to medium duct diameters

Your benefits

For difficult duct configurations and medium conditions
Approved according to EN 15267
Low maintenance due to self-monitoring and contamination check

Fields of application

Emission monitoring of power stations and waste incineration plants
Monitoring of filter plants
Monitoring of the dust loads in factory workshops


The exact device specifications and performance data of the product may deviate from the information provided here, and depend on the application in which the product is being used and the relevant customer specifications.

Technical data
Measurement principles:Scattered light forward
Measured values:Dust concentration (after gravimetric comparison measurement)
Scattered light intensity
Max. number of measurands:1
Measuring ranges:Dust concentration: 0 ... 5 mg/m3 / 0 ... 200 mg/m³
Comment:Higher measuring ranges on request
Process temperature:-25 ... +300 °C
Process pressure:With external purge air unit: -50 ... 30 hPa
With control unit MCU-P: -50 ... 2 hPa
Process gas humidity:
Duct diameter:0.5 ... 3 m
2.5 ... 6 m
Ambient temperature:Sender, receiver unit, control unit MCU-N: -40 ... +60 °C
MCU-P control unit: -40 ... +45 °C
intake temperatures for purge air
27. BImSchV
EN 14181
EN 15267
German Clean Air Regulations
Approved for plants requiring approval
Electrical safety:CE
Enclosure rating:IP 66
Analog outputs:3 outputs:
0/2/4 ... 20 mA, 750 Ω
electrically isolated; two additional outputs if using I/O modules (option)
Analog inputs:2 inputs:
0 ... 20 mA
not electrically isolated; two additional inputs if using I/O modules (option)
Digital outputs:5 relay contacts:
48 V, 1 A
floating; for status signals
Digital inputs:4 floating contacts
Interfaces:RS-232 (service interface)
RS-485 (via optional interface module)
Interface module (option)
USB (service interface)
Bus protocol:Ethernet TCP/IP (via optional interface module)
MODBUS (via optional interface module)
PROFIBUS DP (via optional interface module)
Operation:Via LC-display (option) or software SOPAS ET
Device version:Cross-duct version
System components:Receiver unit
Sender unit
MCU control unit
Test functions:Automatic self-test (linearity, contamination, drift, aging)
Manual linearity check with reference filter
Contamination limits: at 20% warning, at 30% failure
Options:External purge air unit, I/O module(s), Interface module(s)

Возникли проблемы с выбором или появились вопросы - звоните (812) 646-7376 или (981) 777-7376
СенсорTEKOAutonicsBALLUFFifm electronic
Lenze-AC TechSew-EurodriveSolcon  
Copyright © ООО "Электронмаш СПб" | 197349, Россия, Санкт-Петербург, ул. Байконурская, 24 | (812) 646-7376 | sale@inortek.ru