Продажа оборудования для промышленной автоматизации

E-mail: sale@inortek.ru
Тел: (812) 646-73-76

Курс валют ЦБ РФ
1 USD = 56.4115 руб.
1 EUR = 69.0702 руб.
на 24-01-2018
Внимание: все расчеты производятся только в безналичной форме.


Производитель: SICK
Код заказа:
Наличие: Под заказ
Срок поставки: 3-5 нед.
Цена: По запросу Оптовикам ↓
Технические характеристики
Dust Measuring Devices
Transmittance dust measuring device

The DUSTHUNTER T100 is a measuring device for dust at medium to high concentrations. Basic measuring value is transmittance. Opacity and extinction can be calculated and displayed as well as the dust concentration after gravimetric calibration. The device has an integrated contamination check. The DUSTHUNTER T100 is approved according to EN 15267-3.

At a glance

For medium to high dust concentrations
Integrated contamination check
Automatic check of zero and reference point
For small to large measuring distances

Your benefits

Easy installation, commissioning and operation
Measurement independent of gas velocity, humidity and particle charge
Low maintenance due to self-monitoring
Approved according to EN 15267

Fields of application

Emission monitoring of power stations and waste incineration plants
Monitoring of filter plants
Monitoring of dust loads in factory workshops
Process control of ventilation plants and exhaust systems


The exact device specifications and performance data of the product may deviate from the information provided here, and depend on the application in which the product is being used and the relevant customer specifications.

Technical data
Measurement principles:Transmittance measurement
Measured values:Extinction
Relative opacity
Dust concentration
Performance tested measurands:Dust concentration
Max. number of measurands:1
Measuring ranges:Extinction: 0 ... 0.1 / 0 ... 2
Opacity: 0 ... 20 % / 0 ... 100 %
Relative opacity: 0 ... 20 % / 0 ... 100 %
Dust concentration: 0 ... 200 mg/m3 / 0 ... 10,000 mg/m³
Transmittance: 100 ... 80 % / 100 ... 0 %
Comment:The measurement depends on measuring distance and dust properties
Process temperature:-40 ... +600 °C
Process pressure:With external purge air unit: -50 ... 30 hPa
With control unit MCU-P: -50 ... 2 hPa
Process gas humidity:
Duct diameter:0.5 ... 2.5 m
2 ... 5 m
4 ... 12 m
Ambient temperature:Sender/receiver unit, reflector, control unit MCU-N: -40 ... +60 °C
MCU-P control unit: -40 ... +45 °C
27. BImSchV
EN 14181
EN 15267
German Clean Air Regulations
Approved for plants requiring approval
Electrical safety:CE
Enclosure rating:IP 66
Analog outputs:3 outputs:
0/2/4 ... 20 mA, 750 Ω
electrically isolated; two additional outputs if using I/O modules (option)
Analog inputs:2 inputs:
0 ... 20 mA
not electrically isolated; two additional inputs if using I/O modules (option)
Digital outputs:5 relay contacts:
48 V, 1 A
floating; for status signals
Digital inputs:4 floating contacts
Interfaces:RS-232 (service interface)
RS-485 (via optional interface module)
Interface module (option)
USB (service interface)
Bus protocol:Ethernet TCP/IP (via optional interface module)
MODBUS (via optional interface module)
PROFIBUS DP (via optional interface module)
Operation:Via LC-display (option) or software SOPAS ET
Device version:Cross-duct version
System components:Reflector unit
Sender/receiver unit
MCU control unit
Test functions:Automatic self-test (linearity, contamination, drift, aging)
Manual linearity check with reference filter
Contamination limits: at 20% warning, at 30% failure
Options:External purge air unit, I/O module(s), Interface module(s)

Возникли проблемы с выбором или появились вопросы - звоните (812) 646-7376 или (981) 777-7376
СенсорTEKOAutonicsBALLUFFifm electronic
Lenze-AC TechSew-EurodriveSolcon  
Copyright © ООО "Электронмаш СПб" | 197349, Россия, Санкт-Петербург, ул. Байконурская, 24 | (812) 646-7376 | sale@inortek.ru