Продажа оборудования для промышленной автоматизации

E-mail: sale@inortek.ru
Тел: (812) 646-73-76

Курс валют ЦБ РФ
1 USD = 56.5892 руб.
1 EUR = 69.3953 руб.
на 22-01-2018
Внимание: все расчеты производятся только в безналичной форме.

UE4150-01BC700

UE4150-01BC700
Производитель: SICK
Код заказа: 1019557
Наличие: Под заказ
Срок поставки: 3-5 нед.
Количество
Цена: По запросу Оптовикам ↓
Технические характеристики
Network solutions
UE4150, Safety remote I/O
Model NameUE4150-01BC700
Part No.1019557
Easy configuration and diagnosis with the aid of Windows-based CDS software (Configuration & Diagnostic Software)
Offline configuration of the system without FPLC is possible
Support for PROFIsafe V1.30 (10/2002) and V2.0 (11/2005)
Support for PROFIBUS DP V1:
  • Cyclic communication with DP-Master Class 1 (central control)
  • Acyclic communication with DP-Master Class 2 (configuration and diagnosis tool)
2 SDL connections to connect active SICK safety components
Configuration and diagnosis of all the components connected to the SDL connection via the configuration connection of the UE4150
   

Note: This part is discontinued. Please see the replacement product under "Replacement Products" link.

 
 

Applications
Safety command devices:+
Electro-mechanical safety switches:+
Non-contact safety switches:+
Opto-electronic protective devices:+
Two-hand control systems:+
Operating mode selector switch:+
Muting sensors:+
Muting lamp:+
Functions
Safe device communication via EFI/SDL:+
Reset/restart:Manual / automatic / configurable
Technical data
Enclosure rating:IP 67
Safety integrity level:SIL3 (IEC 61508)
Category:Category 4 (EN 954-1)
Maximum power consumption:9 A
Number of safety inputs:8 dual-channel or 16 single-channel
Input voltage HIGH field signal inputs:11 V, 24 V, 28.8 V
Input delay field signal inputs:Configurable 0 ... 90 ms
Number of SDL connections:2
Output voltage HIGH field signal outputs:UV, without load, switched-on
Output current field signal output:0 mA ... 700 mA
Minimum current for fault monitoring:7 mA, 40 mA, on field-signal connections 7 and 8, only when the connection is configured as an output for a muting lamp.
Maximum current SDL connections:1.4 A
Maximum internal resistance SDL connections (power supply):0.3 Ohm
Input voltage HIGH SDL connections (OSSD inputs):13 V, 24 V, 28.8 V
Maximum test puls rate SDL connections (OSSD inputs):500 Hz
Maximum test pulse width SDL connections (OSSD inputs):700 µs
Baud rate PROFIBUS connection:9.6 kbit/s ... 12 Mbit/s
Address range PROFIBUS connection:3 ... 125
Ident number PROFIBUS:071A hex
System part:Network solutions
Electrical data
Fieldbus:PROFIBUS PROFIsafe
Supply voltage:19.2 V DC, 24 V DC, 28.8 V DC

Возникли проблемы с выбором или появились вопросы - звоните (812) 646-7376 или (981) 777-7376
sale@inortek.ru
СенсорTEKOAutonicsBALLUFFifm electronic
OmronPepperl+FuchsSICKTurckBanner
Lenze-AC TechSew-EurodriveSolcon  
Copyright © ООО "Электронмаш СПб" | 197349, Россия, Санкт-Петербург, ул. Байконурская, 24 | (812) 646-7376 | sale@inortek.ru