Продажа оборудования для промышленной автоматизации

E-mail: sale@inortek.ru
Тел: (812) 646-73-76

Курс валют ЦБ РФ
1 USD = 56.7597 руб.
1 EUR = 69.2582 руб.
на 19-01-2018
Внимание: все расчеты производятся только в безналичной форме.


Производитель: SICK
Код заказа:
Наличие: Под заказ
Срок поставки: 3-5 нед.
Цена: По запросу Оптовикам ↓
Технические характеристики
Motor feedback systems rotary HIPERFACE®
Model NameSFM60-H1KB0K02
Part No.-*

* When ordering for the first time, please use the information in "Model Name" instead of "Part No."

At a glance

HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
1,024 sine/ cosine periods per revolution
Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
HIPERFACE® interface: Programming of the position value and electronic type label
Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
Universal cable outlet and common connector versions
Protection class IP 65

Your benefits

Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
The nickel code disk offers a high degree of vibration resistance and an extended temperature range
Shorter development times through standardized mechanical interface
Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.

Number of sine/cosine periods per revolution:1,024
Number of the absolute ascertainable revolutions:4,096 (Multiturn)
Total number of steps:134,217,728
Measuring step:0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
Error limits for the digital absolute value:± 90 angular seconds (via RS485)
Integral non-linearity typ.:± 45 angular seconds (Error limits for evaluating sine/cosine period)
without mechanical tension of the stator coupling
Differential non-linearity:± 7 angular seconds (Non-linearity within a sine/cosine period)
Operating speed:6,000 /min, up to which the absolute position can be reliably produced
Available memory area:1,792 Byte (EEPROM 2048)
Mechanical data
Shaft diameter:3/8 "
Shaft plug-in length:15 mm ... 42 mm
Flange type/stator coupling:Standard version
Dimensions:See dimensional drawing
Mass:0.2 kg
Moment of inertia of the rotor:40 gcm?
Maximum operating speed:9,000 /min 1)
Maximum angular acceleration:50,000 rad/s?
Operating torque:0.6 Ncm (20 °C)
Start up torque:0.8 Ncm (20 °C)
Permissible shaft movement, radial, static:± 0.3 mm
Permissible shaft movement, radial, dynamic:± 0.1 mm
Permissible shaft movement, axial, static:± 0.5 mm
Permissible shaft movement, axial, dynamic:± 0.2 mm
Life of ball bearings:3.6 x 10^9 revolutions
Connection type:Cable, 8-pin, radial, 1.5 m
Shaft version:Blind hollow shaft
1) Self-warming 3.3 K/1,000 1/min, when applying note working temperature range  
Electrical data
Electrical interface:HIPERFACE
Operating voltage range/supply Voltage:7 V DC ... 12 V DC
Recommended supply voltage:8 V DC
Output frequency for sine/cosine signals:0 kHz ... 200 kHz
Operating power consumption (no load):< 80 mA 1)
1) Without load  
Type of code for the absolute value:Binary
Code sequence:Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
Interface signals:Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
Ambient data
Working temperature range:-30 °C ... 115 °C
Storage temperature range:-40 °C ... 115 °C, without package
Relative humidity / Condensation:90 %, Condensation not permitted
Resistance to shocks:100 g, 6 ms (according to EN 60068-2-27)
Resistance to vibration:20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
EMC:According to EN 61000-6-2 and EN 61000-6-3 1)
Enclosure rating:IP 65, according to IEC 60529, with mating connector inserted
1) The EMC according to the standards quoted is achieved when the motor feedback system is mounted in an electrically conductive housing, which is connected to the central earthing point of the motor controller via a cable screen. This is also where the GND (0 V) connection of the power supply voltage is linked to earth. Users must perform their own tests when other screen designs are used.  

Возникли проблемы с выбором или появились вопросы - звоните (812) 646-7376 или (981) 777-7376
СенсорTEKOAutonicsBALLUFFifm electronic
Lenze-AC TechSew-EurodriveSolcon  
Copyright © ООО "Электронмаш СПб" | 197349, Россия, Санкт-Петербург, ул. Байконурская, 24 | (812) 646-7376 | sale@inortek.ru